The TheraPro PEMF/Infrared/Red Light Healing Pad features a proprietary technology that relieves muscle and joint pain, supports relaxation, and many other benefits through Infrared heat, red light, TENS, PEMF, and earthing features. These uniquely crafted heating pads, with natural jade stones and tourmaline deliver the highest quality construction and results.

Therasage has completely revolutionized personal healing products with its proprietary line of TheraPro Healing Pads. The difference is Infrared heat. Conventional pads use heating coils and emit high levels of electromagnetic radiation, or EMF. Such products only heat your skin.

Our unique TheraPro, enhanced with TheraFusion Technology, effectively relieve pain and increase circulation. These expertly crafted devices penetrate deep into your body for optimal relaxation and pain relief. Additionally, they offer therapeutic benefits with TENS and PEMF to help reduce pain and support healing.

• Improved Blood Flow
• Improved Digestion
• Deeper Sleep
• Relief From Allergies
• Improvements in Athletic Performance & Recovery
• Reduction in Pain & Tension
• Improved Mood
• Sharper Cognitive Function
• Improved Drainage
• Immune Support
• Improved Energy

• Full-spectrum infrared, near, mid and far imfrared from 600 through 16,000nm
• red light (600, 630, 660, 663nm)and near-infrared light (810, 830, 850, 900, 910, and 980nm). 
• No exposure to Electro-Magnetic Frequency (EMF), Extremely Low Frequency (ELF), Radio Frequency (RF)
• 98% Emissivity, non-toxic and non-off-gassing
• Natural Rose Quartz to support emotional healing and a calming energy
• Natural Jade Stones to promote relaxation and restore energetic balance
• Natural Amethyst Crystals to enhance mental clarity, reduce stress, and elevate spiritual connection
• Natural Shungite to absorb and neutralize harmful electromagnetic frequencies (EMFs)
• Natural Tourmaline Stones for maximum heat transfer and negative Ion release
• Advanced Earthing Technology for polarity balancing and grounding

P1 - 3Hz (Delta Waves): Deep Regeneration

• Primary focus: Deep sleep, tissue and bone repair.
• Applications: Promotes restorative sleep cycles, enhances cell regeneration, and supports post-surgery or post-workout recovery.
• Conditions supported: Insomnia, chronic fatigue, adrenal burnout, fibromyalgia, bone healing (fractures), and tissue repair after injuries.

P2 - 8Hz (Schumann Resonance): Grounding & Healing

• Primary focus: Natural body balance and inflammation reduction
• Applications: Mimics Earth’s natural frequency, stabilizing the nervous system and improving circulation and oxygenation.
• Conditions supported: Arthritis, joint stiffness, inflammatory pain, migraines, neuropathy, and sluggish wound healing. Often used for general wellness maintenance and to reset circadian rhythm after travel.

P3 - 10Hz (Alpha Waves): Relaxation & Focus

• Primary focus: Stress regulation and creative flow
• Applications: Calms the brain while keeping you alert; excellent before meditation, creative work, or therapy sessions.
• Conditions supported: Anxiety, mild depression, stress-related headaches, muscle tension, and attention imbalance (ADHD).

P4 - 25Hz (Beta Brain Waves): Energy & Alertness

• Primary focus: Cognitive performance and coordination
• Applications: Activates brain function and neuromuscular control — great for morning use or pre-training.
• Conditions supported: Brain fog, sluggishness, poor concentration, and mild motor dysfunction from inactivity or injury recovery.

P5 - 40Hz (Gamma Waves): Memory & Neuroplasticity

• Primary focus: Brain optimization and cellular repair
• Applications: Enhances memory retention, focus, and neural regeneration; supports mitochondrial health.
• Conditions supported: Early-stage cognitive decline, post-concussion recovery, learning deficits, and neurodegenerative prevention.

P6 - 48Hz: Healing, blood circulation, and pain relief - Level 1

• Primary focus: Gentle pain relief and microcirculation
• Applications: Low-intensity frequency ideal for acute injuries, soreness, and mild inflammation.
• Conditions supported: Sprains, strains, muscle knots, tension headaches, menstrual cramps, and post-exercise soreness.

P7 - 56Hz: Healing, blood circulation, and pain relief - Level 2

• Primary focus: Moderate pain relief and detox support
• Applications: Stimulates lymphatic flow and reduces moderate pain by increasing oxygen delivery to tissues.
• Conditions supported: Chronic back or neck pain, arthritis, tendonitis, sciatica, and postural fatigue.

P8 - 64Hz: Healing, blood circulation, and pain relief - Level 3

• Primary focus: Deep tissue recovery and structural repair
• Applications: Designed for long-term or severe pain, muscular imbalance, and slow-healing injuries.
• Conditions supported: Degenerative joint issues (like osteoarthritis), spinal pain, herniated discs, chronic inflammation, and bone density loss.

P9 - Dynamic Mix (All Frequencies with 1-2 second change of frequency): Whole-Body Reset

• Primary focus: Adaptive balance
• Applications: Continuously alternates through all modes to deliver a full-spectrum PEMF experience.
• Conditions supported: General wellness, chronic inflammation, poor circulation, and overall energy balancing — ideal for daily full-body maintenance or pre-sleep recovery.

• Temperature Range: 86°F to 158°F
• Electrical: 110v or 240v options
• Wattage: 100 W
• Weight: 9lbs
• Sizes: Regular: 33.5” x 18.5” (85 cm x 47 cm)

The TheraPro is safe for most, but there are some people who should speak with their healthcare provider before use:

• Women who are pregnant or within 2-4 weeks of delivery
• Fragile populations should always check with their healthcare provider before use
• Pacemaker and/or other electronic implants - does not include titanium implants.

If the square wave delivers most of the benefits, why include the sine wave? Isn’t it weaker and mainly for relaxation? The TheraPro Pad is designed for everyday use and a wide range of applications. We include both waveforms so users can choose the treatment that fits their needs.

Sine Wave

• Shape: Smooth, natural curve—similar to the Earth’s Schumann resonance
• Characteristics: Gentle and soothing
• Best For: Stress relief, sleep support, and nervous system balance
• Benefit: The smooth waveform aligns closely with the body’s natural frequencies

Square Wave

• Shape: Sharp, angular peaks and valleys
• Characteristics: Stronger and more stimulating
• Best For: Acute pain, injury recovery, inflammation, and cellular reboot
• Benefit: The rapid rise and fall provide a concentrated burst of energy—shown in some studies (e.g., NASA, Pulse PEMF) to enhance cellular response

If you recommend PBM for no more than 30 minutes, why is it set for two hours? Shouldn’t the PEMF run longer instead? Each PEMF setting runs on a 30-minute preprogrammed cycle, but you can restart it anytime. Our PBM (PhotoBioModulation aka Red Light Therapy) timer defaults to two hours because the pad is primarily used on the torso and legs—areas that can safely receive longer exposure. The 30-minute guideline mainly applies to the head and face. You can turn the red lights off at any time if you prefer shorter sessions.

The timer goes up to 12 hours and defaults to 8—what does this control? That timer controls the infrared heat only. It allows users to enjoy gentle warmth throughout the night if desired. The PBM and PEMF functions are operated independently from this timer.

Since PEMF and PBM seem so similar, what’s the benefit of using them together? While PEMF and PBM share some effects, they work through different but complementary mechanisms. PBM increases cellular energy (ATP) production, while PEMF improves cellular communication, circulation, and oxygenation. Used together, they enhance one another—creating a more comprehensive therapeutic effect.

If the Therasage Healing Pad already includes near-infrared light, which offers similar effects to red light, how does it differ from the TheraPro PEMF Pad? Red and near-infrared (NIR) light operate at different wavelengths and penetrate to different depths. Red light targets surface-level concerns such as skin tone and healing, while NIR penetrates deeper tissues to support muscles and joints. The TheraPro Pad’s full-spectrum infrared heat can be used with or without the visible red light, allowing fully customizable therapy.

• Click Here To Learn How To Use Your TheraPro Controller
• Download The TheraPro User Guide